MINI MAXX / EZ LINK

EZ LYNK AutoAgent 2 AND 3 Installation Guide

EZ LYNK’s AutoAgent and AutoAgent 2 & 3 are universal vehicle communication devices that allow you to diagnose, monitor, and program your vehicle. They use cloud based technology to allow you and your mechanic/technician to communicate or transmit data in real-time.

‍

Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.

‍

INSTALLATION STEPS

‍

Step 1: Download & Install the AutoAgent App

‍

The AutoAgent app is available for most smart devices. It requires iOS 8+ or Android 5+ to operate. You can download the iOs app here and the Android app here.

‍

Step 2: Create an Account

‍

From the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation. Dealers should always create an account for the end-user or use the account that the end-user has already created.

‍

Step 3: Place Your Key in the ‘Run’ Position

‍

Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.

‍

Step 4: Plug the AutoAgent into your OBD-II Port

‍

With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On-Board Diagnostics port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.

‍

Step 5: Connect to your AutoAgent from your Smart Device

‍

Navigate to the WiFi settings of your smart device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 2 also allows you to connect via Bluetooth.

‍

Step 6: Open the AutoAgent App

‍

After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.

‍

Step 7: Lynk your Vehicle

‍

When you purchase from Unlimited Diesels or an authorized Unlimited Diesels dealer, your vehicle will be AutoLynked. If your smart device has cellular data, you will notice that a message has appeared asking you to lynk the vehicle. Follow these prompts to connect your vehicle with your mechanic/technician. If your smart device does not have cellular data, you will need to connect to an internet available network and re-open the app to complete the lynking process.

‍

Step 8: Program Your Vehicle

‍

After completing the lynking steps you are ready to flash your vehicle.

Navigate to  > Vehicle > ECU Profiles. Here you can view the list of tunes or ECU profiles that are available to you.

Tap the  button to download your desired ECU profile, followed by the ‘Install’ button to flash your vehicle. The app will guide you through the flashing procedure. (When using a smart devices without cellular data you will need to switch to an internet available network to download the ECU profile, then back to the EZ LYNK network to install the ECU profile.)

‍

IF YOU PURCHASED AN EZ LYNK WITH OUR GDP SUPPORT PACK AND NEED ADDITIONAL SUPPORT

‍

GDP support

877-223-5018

support@gdptuning.com

Contact with serial number off of the Ez Lynk tuner.

**TUNES CANNOT BE REQUESTED AND RECEIVED ON THE WEEKEND AS GDP IS CLOSED.**